HEMPALIN ENAMEL 52140 is a glossy alkyd enamel which forms a weather resistant coating. It is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons.

Recommended use:

1. As a general purpose finishing coat in alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive environment.
2. As a finishing coat in engine rooms including tank tops, main engines and auxiliary machinery.

PHYSICAL CONSTANTS:

Shade nos/Colours: 10000* / White.
Finish: Glossy
Volume solids, %: 46 ± 1
Theoretical spreading rate: 15.3 m2/l [613.5 sq.ft./US gallon] - 30 micron/1.2 mils
VOC content: 429 g/l [3.7 lbs/US gallon]
Through-dry: 5,5 hour(s) 20°C/68°F

Surface dry:3 hour(s) 20°C/68°F
Specific gravity: 1.1 kg/litre [9.3 lbs/US gallon]
Flash point: 38 °C [100.4 °F]

                 *Wide range of colours available via Hempel's MULTI-TINT system.
                 The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

APPLICATION DETAILS:

Application method: Airless spray / Air spray / Brush
Thinner (max.vol.): 08230 (5%) / 08230 (15%) / 08230 (5%) see REMARKS overleaf.
Nozzle orifice: 0.018 "
Nozzle pressure: 150 bar [2175 psi]
                          (Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 30 micron [1.2 mils]
Indicated film thickness, wet: 75 micron [3 mils]
Recoat interval, min: According to specification.
Recoat interval, max: According to specification
Cleaning of tools: HEMPEL'S THINNER 08230