HEMPATEX ENAMEL 56360 is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention. Physically drying. Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.

Recommended use:

As an interior and exterior finishing coat in HEMPATEX systems in moderately to severely corrosive environment.

PHYSICAL CONSTANTS:

Shade nos/Colours: 10000*/ White.
Finish: Glossy
Volume solids, %: 32 ± 1
Theoretical spreading rate: 9,1 m2/l [356.9 sq.ft./US gallon] - 35 micron/1.4 mils
VOC content:  594 g/l [5 lbs/US gallon]
Dry to touch: 3 - 4 hour(s) 20°C/68°F
Specific gravity: 1,1 kg/litre [7.9 lbs/US gallon]
Flash point:  41 °C [77 °F]

Surface dry: 1 hour 20°C/68°F

                       *Wide range of colours available via Hempel's MULTI-TINT system.
                        The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

APPLICATION DETAILS:

Application method: Airless spray / Air spray / Brush
Thinner (max.vol.): 08080 (5%) / 08080 (15%) / 08080 (5%)
Nozzle orifice: 0.017 "
Nozzle pressure: 150 bar [2175 psi]
                         (Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 35 micron [1.4 mils]
Indicated film thickness, wet: 100 micron [4 mils]
Recoat interval, min: According to specification.
Recoat interval, max: According to specification.
Cleaning of tools: HEMPEL'S THINNER 08080