HEMPEL’S SHOPPRIMER E 15275 is a two-component epoxy polyamide shopprimer, pigmented with zinc phosphate rust-inhibiting pigments. It is designed for automatic spray application.

Recommended use:

As a shopprimer for protection of blast cleaned steel plate and other structural steel during the storage and building period.

PHYSICAL CONSTANTS:

Shade nos/Colours: 50890/ Red
Finish: Flat
Volume solids, %: 26 ± 1
Theoretical spreading rate: Consult with Hempel's representative
VOC content:636 g/l

Dry to handle: 6 minute(s) (approx.), 20°C/68°F
Fully cured: 7 day(s) , 20°C
Specific gravity:1.2 kg/litre [9.9 lbs/US gallon]
Flash point: 4 °C [39.2 °F]
                The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

APPLICATION DETAILS:

Version, mixed product: 15275
Mixing ratio: BASE 15274: CURING AGENT 95175

                   6.5:3.5 by volume
Application method: Airless spray / Air spray / Brush (touch up)
Thinner (max.vol.):08570 (20%) / 08570 (20%) / 08570 (20%)
Pot life:24 approx. hour(s) 20°C/68°F
Nozzle orifice: 0.021 "
Nozzle pressure: 75 bar [1087.5 psi]
                          (Airless spray data are indicative and subject to adjustment)

Cleaning of tools: HEMPEL'S TOOL CLEANER 99610
Indicated film thickness, dry: 20 micron [0.8 mils]
Indicated film thickness, wet: Not relevant
Overcoat interval, min: Consult with Hempel's representative
Overcoat interval, max: Consult with Hempel's representative

 

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.